Tank Water to Mains Water Switches as Water Saving Devices.

Long Version with more Facts & Proof of what is Crap, Good and BEST !

Please, with due respect – Let’s be frank and have a heart to heart discussion here – a pleasant surprise for many.

I am not going to muck around or pussy foot here when I support and recommend a Mains Water Switching Valve Body named The ACQUASAVER®.

As a Mains Water Switching Device, the ACQUASAVER® is a device that actually works, has next to zero warranty issues ( I have never heard of one EVER ! ) and actually does what it’s designed to do, rather than tell a good story on a brochure and be full of complaints, warranty calls and angst for the Pump Dealer, Property & Home owner.

It should be categorically stated that the following is of the PERSONAL HONEST OPINION of Mark Thomas and throughout this information ahead referenced as IN MARK’s HONEST OPINION – ( I.M.H.O ) and based on PERSONAL KNOWN FACT, personal suffering and huge financial loss & after selling significant volumes of Rainwater Tanks ( circa 12,000 ) and circa 7,500 Pump sets of which approximately +1600 Pumps had Rain Water to Mains Water Switches with them as a Package Deal.

In Marks honest & personal opinion he was MANY MANY hundreds of times supplied with a NOT-FIT FOR PURPOSE Mains Water Switches as it sadly turned out over a 12-18 month horror period of complaints, warranty claims, arguments, yelling matches and more !

That specific product know as a BIANCO RAINSAVER was Great in theory – yet totally piss-poor in operation over time.  Many today are being swapped out and thrown in the bin ! – Sadly, a gross waste of money !

Here below is a few pictures of The BIANCO RAINSAVER :- 3 X BIANCO Rain Savers actually being Mk1, Mk3e, Mk5-Mk6, and in Mark’s honest opinion –  one VERY similar !

We here at AQUATICA Water Pumps have been around many years in the Rainwater Tank & Pump game and have seen it all, endured it all, and suffered from most and now pass on our hard-learned lessons to YOU the un-suspecting – non-aware Pump Dealer and for your customers.

We could sell you NON- WaterMark Approved trouble and overpriced plastic and some Brass NON-WaterMark Approved Brass concoction – let’s call it JUNK & sell without care and just take your money but it’s NOT part of our Vision, here at AQUATICA and our true desire to serve you.

That said, besides it’s just WRONG to Distribute, Wholesale & Sell crap – ( sorry I meant to say inferior equipment ) I.M.H.O & proven thousands of times over across Australia – all full of pending dramas knowingly – we have more respect for customers than that, please.

What is a Rainwater Tank Water to Mains Water Switching Device used for ?      …. also known as Water Source Diversion Valves – or Tank-2-Mains Valves.

When your Harvested Rainwater in your Tank is connected to internal devices e.g. toilets, laundry, and an outside tap – allowance must be made for diversion back to Mains Water Feed in the case of limited Tank water supply or pump failure.

This is usually achieved by 3 different methods -:

  • Mains Water Top-Up to ensure the tank is never empty ( Note: this alone will not handle pump failure –useless )
  • Manual ( by hand ) switching between Tank and Mains Water Supply – that’s great – and it’s NOT Watermark Approved !
  • Automatic & Seamless Water Switching Device installed in conjunction with an Electronic Water Pump.

Automatic Water Switches such as the ACQUASAVER Valves will seamlessly switch the water supply to Mains Water when the Tank Water supply is insufficient or in the case of Water Pump failure either due to power outage or pump malfunction.

Mains Water Switches may be of electronic or hydraulic operation – Electronic is full of problems – SEAMLESS HYDRAULIC OPERATION as is the ACQUASAVER ® Valve is the ONLY WAY to GO !

After Rain Water has been detected in your Tank ( from the Electronic Pump Control ) the Valve Reverting from Mains Water Supply back to Rainwater Tank Water feed & source to appliances- being Toilets, Laundry and external Garden Tap etc.

Automatic Water Switching Devices revert from mains to tank water depending on the mechanism involved:

  • Electronic float device located inside the tank which is set to detect a sufficient water level to enable switch selection of Tank Water supply switching the Water Pump ON or OFF.
  • Automatic Controllers restart facility which will periodically check for sufficient tank water and result in the water source selector to revert back to tank supply.

Here also is a BRASS FRANKENSTEIN ! ” – a NON – WATERMARK Approved Main Water Switch Valve made using “some components that might be Watermark Approved BUT NOT THE ENTIRE UNIT ! “ – BUYER BEWARE !  

Like the BIANCO Mk5 and Mk6 Rainsaver units that have some components that are Watermark approved as PARTS of a Whole Unit  –  DOES NOT MEAN the UNIT is Watermark Approved  – and even then its PLASTIC and has only a lousy 2 YEAR WARRANTY  –  Unlike the ACQUASAVER 1”BAS25  –  with a 5 YEAR Warranty on parts and a LIFETIME Warranty on the SOLID BRASS Outer body.

It’s your choice Folks – Plastic Crap with limited Warranty or ROBUST QUALITY THAT WORKS !

BUYER BEWARE ! Be 100% SURE – Your Mains Water Switching Device is a WATERMARK Approved Device with Certificates to PROVE IT – or walk away and spend your hard earned cash elsewhere !  BEWARE particularly if you or your clients are Building a New Home where you have the Plumbing Inspector coming to Inspect the Plumbers work- let’s just say both You and the Plumber & Home Builder won’t be happy !

BUYER BEWARE ! As many have been caught telling you what you want to hear – PLEASE make sure the Mains Water Switch you choose IS WATERMARK APPROVED – if in doubt ask to see the PROOF – Ask for The License # and email PROOF or don’t buy – it is Mark’s strong recommendation with proof and knowledge backing his stance !

BE CAREFUL OF :- ” Baffling Double Speak” that may leave you assuming a Tanks to Mains Water Switch is WaterMark Approved and it is not – ask for proof !

HERE IS PROOF of The ACQUASAVER® Rain to Mains Water Switch is 100% Watermark Compliant by BELTRAMI GROUP :- Watermark Approval License.

If a NON Approved Mains Water Switch is installed and the house needs to be inspected – the Plumbing Inspectors will NOT be happy and your Plumber will be penalised and made to remove any Tank-to-Mains / Tank to Mains Water Switching Device that is NOT WaterMark Approved.

Your ONLY Guarantee of a QUALITY Watermark Approved Mains Water Switch, in our opinion, is to purchase the ACQUASAVER Mains Water Switch – also known as the Tank-2-Mains Water Switching Device.

Here are pictures of the 2 different sized ACQUASAVER® Mains Water Valves – both the 20 mm – ¾ Inch 50 L/pm ( Litres per Minute ) smaller valve known as the BAS20 & also the larger throat – 200 L/pm ( Litres per Minute ) 25 mm – 1”Inch ACQUASAVER® Valve known as the BAS25 both with Large Warranties against working parts and Life Time Warranty against the SOLID BRASS MAIN Body against corrosion.

How to tell if you are operating with Harvested Tank Water or Mains Water feed ?

When an automatic water switch is installed, the householder may not initially realise when the water source has been swapped as the object is to provide a constant uninterrupted & SEAMLESS AUTOMATIC water supply…unless of course you have a NON- Watermark Approved Manual change over valve – with a handle or lever for manual operation etc.

Remember- IF you or your client choose to go with a Manual Valve Operation like a “Main Rain “– it may not pass inspection by the Plumbing Inspector as they ARE NOT Watermark Approved – they ARE NOT SEAMLESS in Operation !

Being MANUAL in operation, perhaps you will have to go out in the middle of the night to switch over if your Tank runs dry and your toilet is non-operational – or if your Pump fails in a Storm or a Blackout and NO POWER goes to your Pump…. you are screwed !

If your Water Feed & System is Automated, to tell if you are on Mains Water or Tank Water Feed, the key is to listen for the Water Pump operation.

Simply put, if the Pump is not operating but water is being supplied, you will be using the Mains Water Feed.

As the objective of rainwater harvesting is to maximise the use of rainwater whenever possible, it is important to note whether the switch to mains water has occurred due to insufficient tank water – that is an empty rainwater tank, Pump failure or just a blackout during electrical storms etc.

_______________________________________________

Some basic History of Why Mark Offers ONLY what he does ?  – and –  What we know about various products on the market ?

Over the Years some of the Senior Management here at AQUATICA Water Pumps have sold in excess of 7,500 Pumps and over 1550 Pump Sets with Mains Water Switching Units as a combination for Domestic use where Mains Water Switching is required.

Let’s just say part of the Senior Management Team here at AQUATICA Water Pumps ( Mark ) PERSONALLY knows what he is talking about please- if you will.

Mark was previously the largest Dealer in the NATION #1 for Bianco Pumps in 2007-2008-2009 and has seen literally well over 1,000 of RainSaver MK1, MK2 and MK3e go before his hand to clients and sadly where many have suffered with them & had filed hundreds of warranty issues, massive & aggressive arguments, & to Marks great detriment a huge personal, financial and business loss ( let me assure you it was significant ).

The woeful mess forced Mark’s hand to fight back for BOTH our clients and ourselves and to cease the major supplier arrangement with White International – ( BIANCO Pumps & BIANCO RainSaver parent Company ). The relationship folded owing some money to White International but NOTHING like the financial loss to Mark.

After much research, getting first hand industry feedback & sourcing product fit for purpose,  we are now proud to offer a Range of Pumps and Mains Water Switches for ALL Domestic, Rural and some basic Commercial applications.

What will suit the Little Old Lady working around the garden weekly will NOT suit the Builder and Plumber looking for BANG FOR BUCK but a QUALITY Pump and QUALITY Mains Water Switch Package Deal without being of a crazy price.  Thi is the key to success where everyone WINS – and that’s exactly what Mark has put together without fear nor compromise.

Further- Mains Water Switching Valves on offer must be of QUALITY, offer very quick & simple installation ( thus costs ) and must offer warranty and back-up service to us & YOU as our Dealers & your customers, so often being the House Owner.

We could certainly offer Cheaper Plastic Rubbish – we were, at one stage, and that’s where all the mess hit the fan – NO MORE – it’s just NOT worth it to ” TRY ” and save something in the order of $30 – $70. For all the arguments and GRIEF !

I.O.H.O. – chasing that extra saving (on average of circa $50 ) was chasing a false saving when one looks back at all the mess and drama and financial losses – please don’t do it and move forward with us.

So after much soul searching, product hunting and trials we proudly offer for Pump Dealers, Resellers and their client Home Owner, Renovators, Developers, Builders and Plumbers the TOP SHELF MAINS WATER SWITCHING UNITS of GREAT QUALITY with GREAT PRICING.

With that history, lessons and all learnt we arrive at what simply is the BEST VALUE for MONEY – No DRAMA Mains Water Switching Device on the market today.

_______________________________________________

Introducing The AcquaSaver ® – a.k.a The MaxiSAVE Valve or The WILO Water Widget

The ACQUASAVER®- a.k.a The MaxiSAVE Valve or MHR Valve and also as The WILO Water Widget are all the exact same unit made by The Beltrami Group – refer http://www.beltrami.com.au/history.php

Again, here is PROOF The ACQUASAVER® Rain to Mains Water Switch is 100% Watermark Compliant by BELTRAMI GROUP :- You can view the extensive Watermark Approval & License # 060075 for The Beltrami Group and their ACQUASAVER Valves by clicking here.

Introduction

The AcquaSaver® Valve is a fully automatic hydraulically driven – mechanical rainwater/mains water changeover device designed for pressure pump supply systems for harvesting rainwater for the toilet, laundry and household applications with automatic mains backup.

The AcquaSaver® is an Automatic Hydraulically operated Mains to Rainwater changeover valve.

There are 2 different sized Valves – one that will allow +200 Litre per Minute Flow and the Smaller allowing approx 50 Litre per Minute flow – best used for small homes, villas etc.

Operation

The AcquaSaver® Valve will always prioritise the use of rainwater over mains water, when rainwater is available, automatically switching over to mains water in the event of the rainwater tank running low or an electrical failure.

When rainwater has been replenished or power has been restored to the pump, the AcquaSaver valve will automatically prioritise back to rainwater.

The pump is only active when rainwater is being drawn from the water tank, it does not operate when the AcquaSaver Valve has switched to mains position.

The pump controller starts and stops the pump when it detects a demand – for example flushing a toilet or using a washing machine.

The operating mechanism of the AcquaSaver Valve is a unique patent design, it works by hydraulic water pressure created by the pump to close one inlet fully before opening the other inlet.

This ensures an extremely reliable mechanism using few moving parts and no electronic components and no energy consumption.

See the BAS25 – 25 mm – 1”ACQUASAVER® Valve Brochure here.

See the BAS20 – 20 mm – 3/4”ACQUASAVER® Valve Brochure here.

The ACQUASAVER Valve® – a.k.a MaxiSAVE or WILO Water Widget Valve are absolutely ideal for rainwater harvesting which switches from Mains Water Feed to Tank Water Feed via a Pump whenever Tank water is available and automatically defaults to mains water feed in the event of a power outage during a storm etc, or pump failure.

The larger 1” INCH – BAS25 ACQUASAVER Valve is the best way to go – particularly if the Home is going to have several External Taps running with Lawn Sprinklers & hoses running etc. For the little more costs its best to have a Valve that can offer much more than its “ Little Brother “ thus upgrading from the BAS20 mm being the BAS25 ACQUASAVER® Mains Water Switching Valve.

The BAS20 – 20 mm or ¾”ACQUASAVER® Valve has at best only a 50 Litre per Minute Flow Rate.

Larger Pumps matched with the BAS25 AcquaSaver Valve can move + 200 Litres per minute.

_______________________________________________

 1″ or 25mm BAS25 – ACQUASAVER® Solid BRASS Switching Valve comes with dual 1″ outlets which gives the consumers flexibility to use one or both outlets, which makes AcquaSaver™ unique and ideal for domestic and commercial applications.

The 1″ (25mm) BAS25 – ACQUASAVER® Solid BRASS Switching Valve comes with a 5 Year Manufacturer’s Warranty against Parts and Lifetime Warranty
against the MAIN SOLID BRASS BODY.

Tank Water to Mains Water Switches as Water Saving Devices.

Long Version with more Facts & Proof of what is Crap, Good and BEST !

Please, with due respect – Let’s be frank and have a heart to heart discussion here – a pleasant surprise for many.

I am not going to muck around or pussy foot here when I support and recommend a Mains Water Switching Valve Body named The ACQUASAVER®.

As a Mains Water Switching Device, the ACQUASAVER® is a device that actually works, has next to zero warranty issues ( I have never heard of one EVER ! ) and actually does what it’s designed to do, rather than tell a good story on a brochure and be full of complaints, warranty calls and angst for the Pump Dealer, Property & Home owner.

It should be categorically stated that the following is of the PERSONAL HONEST OPINION of Mark Thomas and throughout this information ahead referenced as IN MARK’s HONEST OPINION – ( I.M.H.O ) and based on PERSONAL KNOWN FACT, personal suffering and huge financial loss & after selling significant volumes of Rainwater Tanks ( circa 12,000 ) and circa 7,500 Pump sets of which approximately +1600 Pumps had Rain Water to Mains Water Switches with them as a Package Deal.

In Marks honest & personal opinion he was MANY MANY hundreds of times supplied with a NOT-FIT FOR PURPOSE Mains Water Switches as it sadly turned out over a 12-18 month horror period of complaints, warranty claims, arguments, yelling matches and more !

That specific product know as a BIANCO RAINSAVER was Great in theory – yet totally piss-poor in operation over time.  Many today are being swapped out and thrown in the bin ! – Sadly, a gross waste of money !

Here below is a few pictures of The BIANCO RAINSAVER :- 3 X BIANCO Rain Savers actually being Mk1, Mk3e, Mk5-Mk6, and in Mark’s honest opinion –  one VERY similar !

We here at AQUATICA Water Pumps have been around many years in the Rainwater Tank & Pump game and have seen it all, endured it all, and suffered from most and now pass on our hard-learned lessons to YOU the un-suspecting – non-aware Pump Dealer and for your customers.

We could sell you NON- WaterMark Approved trouble and overpriced plastic and some Brass NON-WaterMark Approved Brass concoction – let’s call it JUNK & sell without care and just take your money but it’s NOT part of our Vision, here at AQUATICA and our true desire to serve you.

That said, besides it’s just WRONG to Distribute, Wholesale & Sell crap – ( sorry I meant to say inferior equipment ) I.M.H.O & proven thousands of times over across Australia – all full of pending dramas knowingly – we have more respect for customers than that, please.

What is a Rainwater Tank Water to Mains Water Switching Device used for ?      …. also known as Water Source Diversion Valves – or Tank-2-Mains Valves.

When your Harvested Rainwater in your Tank is connected to internal devices e.g. toilets, laundry, and an outside tap – allowance must be made for diversion back to Mains Water Feed in the case of limited Tank water supply or pump failure.

This is usually achieved by 3 different methods -:

  • Mains Water Top-Up to ensure the tank is never empty ( Note: this alone will not handle pump failure –useless )
  • Manual ( by hand ) switching between Tank and Mains Water Supply – that’s great – and it’s NOT Watermark Approved !
  • Automatic & Seamless Water Switching Device installed in conjunction with an Electronic Water Pump.

Automatic Water Switches such as the ACQUASAVER Valves will seamlessly switch the water supply to Mains Water when the Tank Water supply is insufficient or in the case of Water Pump failure either due to power outage or pump malfunction.

Mains Water Switches may be of electronic or hydraulic operation – Electronic is full of problems – SEAMLESS HYDRAULIC OPERATION as is the ACQUASAVER ® Valve is the ONLY WAY to GO !

After Rain Water has been detected in your Tank ( from the Electronic Pump Control ) the Valve Reverting from Mains Water Supply back to Rainwater Tank Water feed & source to appliances- being Toilets, Laundry and external Garden Tap etc.

Automatic Water Switching Devices revert from mains to tank water depending on the mechanism involved:

  • Electronic float device located inside the tank which is set to detect a sufficient water level to enable switch selection of Tank Water supply switching the Water Pump ON or OFF.
  • Automatic Controllers restart facility which will periodically check for sufficient tank water and result in the water source selector to revert back to tank supply.

Here also is a BRASS FRANKENSTEIN ! ” – a NON – WATERMARK Approved Main Water Switch Valve made using “some components that might be Watermark Approved BUT NOT THE ENTIRE UNIT ! “ – BUYER BEWARE !  

Like the BIANCO Mk5 and Mk6 Rainsaver units that have some components that are Watermark approved as PARTS of a Whole Unit  –  DOES NOT MEAN the UNIT is Watermark Approved  – and even then its PLASTIC and has only a lousy 2 YEAR WARRANTY  –  Unlike the ACQUASAVER 1”BAS25  –  with a 5 YEAR Warranty on parts and a LIFETIME Warranty on the SOLID BRASS Outer body.

It’s your choice Folks – Plastic Crap with limited Warranty or ROBUST QUALITY THAT WORKS !

BUYER BEWARE ! Be 100% SURE – Your Mains Water Switching Device is a WATERMARK Approved Device with Certificates to PROVE IT – or walk away and spend your hard earned cash elsewhere !  BEWARE particularly if you or your clients are Building a New Home where you have the Plumbing Inspector coming to Inspect the Plumbers work- let’s just say both You and the Plumber & Home Builder won’t be happy !

BUYER BEWARE ! As many have been caught telling you what you want to hear – PLEASE make sure the Mains Water Switch you choose IS WATERMARK APPROVED – if in doubt ask to see the PROOF – Ask for The License # and email PROOF or don’t buy – it is Mark’s strong recommendation with proof and knowledge backing his stance !

BE CAREFUL OF :- ” Baffling Double Speak” that may leave you assuming a Tanks to Mains Water Switch is WaterMark Approved and it is not – ask for proof !

HERE IS PROOF of The ACQUASAVER® Rain to Mains Water Switch is 100% Watermark Compliant by BELTRAMI GROUP :- Watermark Approval License.

If a NON Approved Mains Water Switch is installed and the house needs to be inspected – the Plumbing Inspectors will NOT be happy and your Plumber will be penalised and made to remove any Tank-to-Mains / Tank to Mains Water Switching Device that is NOT WaterMark Approved.

Your ONLY Guarantee of a QUALITY Watermark Approved Mains Water Switch, in our opinion, is to purchase the ACQUASAVER Mains Water Switch – also known as the Tank-2-Mains Water Switching Device.

Here are pictures of the 2 different sized ACQUASAVER® Mains Water Valves – both the 20 mm – ¾ Inch 50 L/pm ( Litres per Minute ) smaller valve known as the BAS20 & also the larger throat – 200 L/pm ( Litres per Minute ) 25 mm – 1”Inch ACQUASAVER® Valve known as the BAS25 both with Large Warranties against working parts and Life Time Warranty against the SOLID BRASS MAIN Body against corrosion.

How to tell if you are operating with Harvested Tank Water or Mains Water feed ?

When an automatic water switch is installed, the householder may not initially realise when the water source has been swapped as the object is to provide a constant uninterrupted & SEAMLESS AUTOMATIC water supply…unless of course you have a NON- Watermark Approved Manual change over valve – with a handle or lever for manual operation etc.

Remember- IF you or your client choose to go with a Manual Valve Operation like a “Main Rain “– it may not pass inspection by the Plumbing Inspector as they ARE NOT Watermark Approved – they ARE NOT SEAMLESS in Operation !

Being MANUAL in operation, perhaps you will have to go out in the middle of the night to switch over if your Tank runs dry and your toilet is non-operational – or if your Pump fails in a Storm or a Blackout and NO POWER goes to your Pump…. you are screwed !

If your Water Feed & System is Automated, to tell if you are on Mains Water or Tank Water Feed, the key is to listen for the Water Pump operation.

Simply put, if the Pump is not operating but water is being supplied, you will be using the Mains Water Feed.

As the objective of rainwater harvesting is to maximise the use of rainwater whenever possible, it is important to note whether the switch to mains water has occurred due to insufficient tank water – that is an empty rainwater tank, Pump failure or just a blackout during electrical storms etc.

_______________________________________________

Some basic History of Why Mark Offers ONLY what he does ?  – and –  What we know about various products on the market ?

Over the Years some of the Senior Management here at AQUATICA Water Pumps have sold in excess of 7,500 Pumps and over 1550 Pump Sets with Mains Water Switching Units as a combination for Domestic use where Mains Water Switching is required.

Let’s just say part of the Senior Management Team here at AQUATICA Water Pumps ( Mark ) PERSONALLY knows what he is talking about please- if you will.

Mark was previously the largest Dealer in the NATION #1 for Bianco Pumps in 2007-2008-2009 and has seen literally well over 1,000 of RainSaver MK1, MK2 and MK3e go before his hand to clients and sadly where many have suffered with them & had filed hundreds of warranty issues, massive & aggressive arguments, & to Marks great detriment a huge personal, financial and business loss ( let me assure you it was significant ).

The woeful mess forced Mark’s hand to fight back for BOTH our clients and ourselves and to cease the major supplier arrangement with White International – ( BIANCO Pumps & BIANCO RainSaver parent Company ). The relationship folded owing some money to White International but NOTHING like the financial loss to Mark.

After much research, getting first hand industry feedback & sourcing product fit for purpose,  we are now proud to offer a Range of Pumps and Mains Water Switches for ALL Domestic, Rural and some basic Commercial applications.

What will suit the Little Old Lady working around the garden weekly will NOT suit the Builder and Plumber looking for BANG FOR BUCK but a QUALITY Pump and QUALITY Mains Water Switch Package Deal without being of a crazy price.  Thi is the key to success where everyone WINS – and that’s exactly what Mark has put together without fear nor compromise.

Further- Mains Water Switching Valves on offer must be of QUALITY, offer very quick & simple installation ( thus costs ) and must offer warranty and back-up service to us & YOU as our Dealers & your customers, so often being the House Owner.

We could certainly offer Cheaper Plastic Rubbish – we were, at one stage, and that’s where all the mess hit the fan – NO MORE – it’s just NOT worth it to ” TRY ” and save something in the order of $30 – $70. For all the arguments and GRIEF !

I.O.H.O. – chasing that extra saving (on average of circa $50 ) was chasing a false saving when one looks back at all the mess and drama and financial losses – please don’t do it and move forward with us.

So after much soul searching, product hunting and trials we proudly offer for Pump Dealers, Resellers and their client Home Owner, Renovators, Developers, Builders and Plumbers the TOP SHELF MAINS WATER SWITCHING UNITS of GREAT QUALITY with GREAT PRICING.

With that history, lessons and all learnt we arrive at what simply is the BEST VALUE for MONEY – No DRAMA Mains Water Switching Device on the market today.

_______________________________________________

Introducing The AcquaSaver ® – a.k.a The MaxiSAVE Valve or The WILO Water Widget

The ACQUASAVER®- a.k.a The MaxiSAVE Valve or MHR Valve and also as The WILO Water Widget are all the exact same unit made by The Beltrami Group – refer http://www.beltrami.com.au/history.php

Again, here is PROOF The ACQUASAVER® Rain to Mains Water Switch is 100% Watermark Compliant by BELTRAMI GROUP :- You can view the extensive Watermark Approval & License # 060075 for The Beltrami Group and their ACQUASAVER Valves by clicking here.

Introduction

The AcquaSaver® Valve is a fully automatic hydraulically driven – mechanical rainwater/mains water changeover device designed for pressure pump supply systems for harvesting rainwater for the toilet, laundry and household applications with automatic mains backup.

The AcquaSaver® is an Automatic Hydraulically operated Mains to Rainwater changeover valve.

There are 2 different sized Valves – one that will allow +200 Litre per Minute Flow and the Smaller allowing approx 50 Litre per Minute flow – best used for small homes, villas etc.

Operation

The AcquaSaver® Valve will always prioritise the use of rainwater over mains water, when rainwater is available, automatically switching over to mains water in the event of the rainwater tank running low or an electrical failure.

When rainwater has been replenished or power has been restored to the pump, the AcquaSaver valve will automatically prioritise back to rainwater.

The pump is only active when rainwater is being drawn from the water tank, it does not operate when the AcquaSaver Valve has switched to mains position.

The pump controller starts and stops the pump when it detects a demand – for example flushing a toilet or using a washing machine.

The operating mechanism of the AcquaSaver Valve is a unique patent design, it works by hydraulic water pressure created by the pump to close one inlet fully before opening the other inlet.

This ensures an extremely reliable mechanism using few moving parts and no electronic components and no energy consumption.

See the BAS25 – 25 mm – 1”ACQUASAVER® Valve Brochure here.

See the BAS20 – 20 mm – 3/4”ACQUASAVER® Valve Brochure here.

The ACQUASAVER Valve® – a.k.a MaxiSAVE or WILO Water Widget Valve are absolutely ideal for rainwater harvesting which switches from Mains Water Feed to Tank Water Feed via a Pump whenever Tank water is available and automatically defaults to mains water feed in the event of a power outage during a storm etc, or pump failure.

The larger 1” INCH – BAS25 ACQUASAVER Valve is the best way to go – particularly if the Home is going to have several External Taps running with Lawn Sprinklers & hoses running etc. For the little more costs its best to have a Valve that can offer much more than its “ Little Brother “ thus upgrading from the BAS20 mm being the BAS25 ACQUASAVER® Mains Water Switching Valve.

The BAS20 – 20 mm or ¾”ACQUASAVER® Valve has at best only a 50 Litre per Minute Flow Rate.

Larger Pumps matched with the BAS25 AcquaSaver Valve can move + 200 Litres per minute.

_______________________________________________

 1″ or 25mm BAS25 – ACQUASAVER® Solid BRASS Switching Valve comes with dual 1″ outlets which gives the consumers flexibility to use one or both outlets, which makes AcquaSaver™ unique and ideal for domestic and commercial applications.

The 1″ (25mm) BAS25 – ACQUASAVER® Solid BRASS Switching Valve comes with a 5 Year Manufacturer’s Warranty against Parts and Lifetime Warranty
against the MAIN SOLID BRASS BODY.

Features

  • Easy to Install
  • Full flow 1″ outlets
  • Solid Brass – Weather proof – Built to last!
  • No regular maintenance
  • No electrical components
  • No standby electrical consumption
  • Suitable for any surface and submersible pressure pump
  • No float required on auto restarting pumps
  • Can be mounted in any position and any distance from the pump
  • Can be mounted directly onto the pump
  • Certified dual check valve for backflow prevention
  • Hydraulically operated
  • Patented design
  • Watermark approved to ATS/NZS 477      
  • 5 Year manufacturer’s Warranty
  • Lifetime replacement Warranty on all brass components

Specifications

  • Max Mains Pressure 1050 kPa
  • Max Pump Pressure 1050 kPa
  • Max Flow Rate + 200 Litres per Minute ( Huge throat )
  • Rainwater Inlet 1″ BSP F (25mm)
  • Mains Water Inlet 1″ BSP F (25mm)
  • Outlets 1″ BSP F (25mm)
  • Weight 1.9 Kg

Complies with AS/NZS 3500.1 when installed by a Licensed Plumber.

Features

  • Easy to Install
  • Full flow 1″ outlets
  • Solid Brass – Weather proof – Built to last!
  • No regular maintenance
  • No electrical components
  • No standby electrical consumption
  • Suitable for any surface and submersible pressure pump
  • No float required on auto restarting pumps
  • Can be mounted in any position and any distance from the pump
  • Can be mounted directly onto the pump
  • Certified dual check valve for backflow prevention
  • Hydraulically operated
  • Patented design
  • Watermark approved to ATS/NZS 477      
  • 5 Year manufacturer’s Warranty
  • Lifetime replacement Warranty on all brass components

Specifications

  • Max Mains Pressure 1050 kPa
  • Max Pump Pressure 1050 kPa
  • Max Flow Rate + 200 Litres per Minute ( Huge throat )
  • Rainwater Inlet 1″ BSP F (25mm)
  • Mains Water Inlet 1″ BSP F (25mm)
  • Outlets 1″ BSP F (25mm)
  • Weight 1.9 Kg

Complies with AS/NZS 3500.1 when installed by a Licensed Plumber.

_______________________________________________

The 3/4″ (20mm) BAS20 – ACQUASAVER® Solid BRASS Switching Valve

There is now a smaller 20 mm – ¾ Inch -BAS20 ACQUASAVER ® Mains Water Switch also made by Beltrami Group.

It’s very popular as the “Little Brother “ of the Larger 1” Version and ideal where a less expensive Pump & Mains Water Switch option is available and will ONLY be used for a Small Single Storey Home, a Villa, Granny Flat, Studio etc.

This Valve has a much smaller Flow Rate of 50 Litres per Minute.

The BAS-20 Valve is suitable for up to 2 toilets and washing machine and 1 x extra tap outlet- garden tap outlet ONLY.

Complies to AS/NZS 3500.1 when installed by a licensed plumber.

NOTE: According to AS/NZS 3500.1 maximum allowable pressure in buildings is 500 KPa

The BAS25 – 1” – 25 mm ACQUASAVER Valve Brochure can be viewed here.   

Features

  • Easy to install
  • Patent design
  • Solid Brass mounting bracket (optional)
  • Watermark approved to ATS/NZS 477
  • Does not require regular maintenance
  • No electrical consumption
  • No electronic components
  • Suitable for any pressure pump with sufficient head pressure
  • Can be mounted in any position
  • Built-in dual check valve for backflow prevention
  • 2 Year Warranty

Specifications

  • Max Mains Pressure 500 KPa
  • Max Pump Pressure 600 KPa
  • Min Pump Pressure 300 KPa
  • Max Flow Rate 50 LPM
  • Max Water Temperature 40 C
  • Min Water Temperature 0 C
  • Pump Inlet 25mm 1” BSP F
  • Mains Water in 25mm 1” BSP F
  • Outlet 20mm 3/4” BSP F
  • Weight 0.85 KG
  • Meets Requirements of ATS 5200.477

In Mark’s Honest Opinion ( I.M.H.O ) there is ONLY one unit that you should consider and place your hard earned dollars towards and that is the Hydraulically Drive SOLID BRASS Switching Valve called the ACQUASAVER®, also rebadged and known as The MaxiSAVE Valve & also as the Wilo Water Widget –  the later 2 are EXACTLY the SAME VALVE – just renamed.

There are many other products available and frankly “ In Theory “ they are brilliant.

Mark said even he was extremely excited when the Bianco Rainsaver MK1 was introduced to major distributors back in 2007 – factually he sold well over +1600 Units and sadly the Warranty calls were endless, stressful, argumentative – and NEVER AGAIN !

Mark might be some things to some people – he might look stupid, but one thing he certainly is not, is STUPID or a SLOW LEARNER !  –  He is a FIGHTER and loves to serve people on a WIN-WIN Scenario – where nobody gets hurt.

The Bianco Rainsaver MK3 is an Automatic Rainwater to Mains Water Changeover Switching Device that was designed to provide automatic mains back up feed to toilets and laundry etc. for Automated Pressure Controlled Pump supply systems.

The Bianco Rainsaver – Rain Saver MK1, RainSaver MK11 & RainSaver MK3e, RS4e- MK4,

..How about a PLASTIC MK 5, and why not a MK6 – DN20 with a lousy 2 Year Warranty .. WHY ?

The Bianco Rainsaver Mk1, Bianco Rain Saver MK11 & The Bianco Rainsaver MK3e was designed in house by White International Pty Ltd in Sydney to be installed in conjunction and in-line with the Mains water feed with a Pressure Pump delivery system that was fitted with a float switch as well as an independent pressure and flow controller an automated – built in loss of prime and programmed automatic re-start.

Nothing like keep digging a HOLE – BIANCO – White Int. said – lets bring out some plastic crap and call it RS4E or MK4, -…

… Why stop there, let’ s keep digging they must have thought ?… lets bring out a MK5 and now a MK6 as they try to perfect the rubbish – Gheeesh, slow learners !

Looking at the Rainsaver MK5 and its mate the MK6 being a plastic composite TECHNOPOLYMER unit with ONLY 2 Years Warranty – one has to ask as to what they can’t be sold separately and ONLY can be sold as per Watermark License Conditions as a PUMP and VALVE assembly – WHY ?

This not only snags a Pump Dealer & their clients to purchase the Package yet it also grants a COST that could be construed as onerous at best – unreasonable and dare Mark say a RIP-OFF.

If that’s not bad enough – the Rainsaver Mk5 and Mk6 et al PLASTIC Valves ONLY come with a 2 YEAR Warranty ! – WHY ?

The 1” ACQUASAVER® comes with a 5 year Parts Warranty and a LIFE TIME WARRANTY on the SOLID BRASS BODY –  it’s NOT PLASTIC as is the Bianco Rainsaver DN20 – Rainsaver Mk5 and Rainsaver Mk6!

Regarding thousands of warranty calls and complaints of failed and ceased RAINSAVER Mains Water switching units, – YES, some are / were very poor installation matters but most are NOT.

The Bianco RainSaver MK 1 was replaced by an “ upgraded Bianco RainSaver Mk 11” to only be put to one side as a Hydraulically controlled unit and replaced with the Bianco Rainsaver MK3e version being an electronic controlled version reliant on a 240 V power source and an internal solenoid to drive the switching valve – this was a step in the WRONG direction in our opinion – not to mention we now also had to add a 12 Volt Float into the Tank to help the unit understand what it is / was to do in theory.

That 3rd generation unit being the Bianco Rainsaver MK3e came out with much fanfare also – but again to the drama and angst of Water Pump Dealers and consumers across Australia and New Zealand when the units began to overheat, the body would warp and or overheat the main sealant “O Ring“ causing it to unseat and drip water constantly and it still goes on today all over Australia.

These days the architect of that mess has retired while the sh1t still today hits the fan !

Anyway, Mark continues his 100% focus on recovery and helping, by now Importing QUALITY PUMPS ONLY & Distributing QUALITY PRODUCTS – 2nd to NONE !

For what it’s worth to back up Mark’s claims & deep concerns – Mark has an e-mail sent to INTERNAL KEY MANAGEMENT at WHITE INTERNATIONAL – declaring & advising Staff on the Warranty Customer Care Front-Line “ to SAY and ADMIT to NOTHING “ – that email, let’s say, was also sent accidentally outside the internal Head Office distribution list ! – Mark has a copy in his custody as more evidence.

The line in the sand came when Mark lost a valued customer spending in excess of $250K a Year over arguments regarding quality and constant warranty complaints with the Bianco Rainsaver !

At about that point of time Marks sense of humour was beginning to fail BADLY –  in fact, in his honest opinion yet again – if the Rainsaver units were all melted down they wouldn’t even make good plastic speed bump or decent crab pots.  Might you feel this is harsh just call around before you hand over your well-earned dollars !

In closing this section all we say is Buyer Beware and trust you will benefit from our bad experiences.

                                                               _________________________________________

The Davey Rainbank Kit – KRB1, KRB2, KRB3, KRB4, KRBS1, KRBS2… and so on ! 

   

The following again is Marks Opinion ( Fact & Founded )  and that of many – many Plumbers, Builders and Home owners across the Nation – don’t just take his word for it just call around and ask.

The 2nd Generation RainBank® automatic rainwater harvesting controller allows the priority sourcing of rainwater for toilets and laundry, only using mains water as a backup. RainBank Kit KRB1 is ideal for average size homes.

KRB1 comes with the two stage HP45-05 pump. KRB2 comes with the four stage HS 50-06 pump. KRB3 comes with the four stage HM 60-08 pump. KRBS1 comes with a two stage submersible D42A/B pump that goes inside your rainwater tank to reduce operation noise.

The KRBS2 comes with a three stage submersible D53 A/B pump that goes inside your rainwater tank to reduce operation noise…yet the real noise comes when arguing for service and warranty help due to the product constantly failing and out of order.

While not as bad as the Rainsaver Units by White International & their Bianco, BIANCO PUMPZ, BIANCO Series 2 et al. –  they still have created much angst in the industry.

That said, you pay through your nose for one as it’s related to a DAVEY as a brand – if you wish to line fat cats pockets knock yourself out,- but please don’t say you weren’t warned.

The ONGA Water Switch Mk1 and The ONGA Water Switch MK11 – with the MK1 switching units more commonly referred to as The Water-WITCH

   

The following again is just I.O.H.O and that of many Plumbers, Builders and Home owners across the Nation – don’t just take our word for it – call around and ask.

I.M.H.O the ONGA Water Switch by ONGA ( a Division of U.S Giant Pentair ) has come a long way since the first generation Water Switch so very often referred to as the WaterWITCH !  The 2nd generation Onga Water Switch is really nothing more than a low cost Calessie Valve System with “ a Nice Pretty – Styled Plastic Aqua Housing “ and a digital gauge worth nothing so they can charge like wounded bulls offering a perception there is so much more for your money.

DO NOT be fooled by the design and marketing hype – all you will be doing again is tearing up your hard earned cash for nothing more that we can offer you with the MaxiSAVE™, WILO Water Widget. or AcquaSaver solid brass unit.

I.M.H.O an over-priced Pig is an over-priced Pig no matter how much “plastic” lipstick you cover it with !

Again I.M.H.O, all you are doing is paying for a Brand, a Boardroom, a Global Public Company and its Management.

                    ______________________________________

In OUR HONEST OPINION,  we here at AQUATICA Water Pumps sure understand where ours & hopefully your money is best spent!

We here at AQUATICA Water Pumps sure understand where ours & hopefully your money is best spent, or as Mark says – rather than feeding Brand named
Fat Cats & pending drama all associated !

Should you still want a Mains Water Switch, other than the ACQUASAVER BAS25 or BAS20 – we sadly can’t help nor serve you, and wouldn’t sell
them to you out of sheer respect.

Mark thanks you for reading and he trusts the above has been of some help, explanation and solid advice.

At AQUATICA Water Pumps, we look forward to serving you with QUALITY PUMPS, and most importantly, the BEST Rain Water to Mains Water Supply Switching Valves that your money, and that of your clients, can buy – again 2nd to NONE !

In closing- for those who wish not to read, can’t read for whatever reason – Mark respectfully sums up & submits the following picture – as they say a PICTURE is worth 1,000 WORDS !  – BUYER BEWARE

When a Picture is worth 1,000 Words !

_______________________________________________

The 3/4″ (20mm) BAS20 – ACQUASAVER® Solid BRASS Switching Valve

There is now a smaller 20 mm – ¾ Inch -BAS20 ACQUASAVER ® Mains Water Switch also made by Beltrami Group.

It’s very popular as the “Little Brother “ of the Larger 1” Version and ideal where a less expensive Pump & Mains Water Switch option is available and will ONLY be used for a Small Single Storey Home, a Villa, Granny Flat, Studio etc.

This Valve has a much smaller Flow Rate of 50 Litres per Minute.

The BAS-20 Valve is suitable for up to 2 toilets and washing machine and 1 x extra tap outlet- garden tap outlet ONLY.

Complies to AS/NZS 3500.1 when installed by a licensed plumber.

NOTE: According to AS/NZS 3500.1 maximum allowable pressure in buildings is 500 KPa

The BAS25 – 1” – 25 mm ACQUASAVER Valve Brochure can be viewed here.   

Features

  • Easy to install
  • Patent design
  • Solid Brass mounting bracket (optional)
  • Watermark approved to ATS/NZS 477
  • Does not require regular maintenance
  • No electrical consumption
  • No electronic components
  • Suitable for any pressure pump with sufficient head pressure
  • Can be mounted in any position
  • Built-in dual check valve for backflow prevention
  • 2 Year Warranty

Specifications

  • Max Mains Pressure 500 KPa
  • Max Pump Pressure 600 KPa
  • Min Pump Pressure 300 KPa
  • Max Flow Rate 50 LPM
  • Max Water Temperature 40 C
  • Min Water Temperature 0 C
  • Pump Inlet 25mm 1” BSP F
  • Mains Water in 25mm 1” BSP F
  • Outlet 20mm 3/4” BSP F
  • Weight 0.85 KG
  • Meets Requirements of ATS 5200.477

In Mark’s Honest Opinion ( I.M.H.O ) there is ONLY one unit that you should consider and place your hard earned dollars towards and that is the Hydraulically Drive SOLID BRASS Switching Valve called the ACQUASAVER®, also rebadged and known as The MaxiSAVE Valve & also as the Wilo Water Widget –  the later 2 are EXACTLY the SAME VALVE – just renamed.

There are many other products available and frankly “ In Theory “ they are brilliant.

Mark said even he was extremely excited when the Bianco Rainsaver MK1 was introduced to major distributors back in 2007 – factually he sold well over +1600 Units and sadly the Warranty calls were endless, stressful, argumentative – and NEVER AGAIN !

Mark might be some things to some people – he might look stupid, but one thing he certainly is not, is STUPID or a SLOW LEARNER !  –  He is a FIGHTER and loves to serve people on a WIN-WIN Scenario – where nobody gets hurt.

The Bianco Rainsaver MK3 is an Automatic Rainwater to Mains Water Changeover Switching Device that was designed to provide automatic mains back up feed to toilets and laundry etc. for Automated Pressure Controlled Pump supply systems.

The Bianco Rainsaver – Rain Saver MK1, RainSaver MK11 & RainSaver MK3e, RS4e- MK4,

..How about a PLASTIC MK 5, and why not a MK6 – DN20 with a lousy 2 Year Warranty .. WHY ?

The Bianco Rainsaver Mk1, Bianco Rain Saver MK11 & The Bianco Rainsaver MK3e was designed in house by White International Pty Ltd in Sydney to be installed in conjunction and in-line with the Mains water feed with a Pressure Pump delivery system that was fitted with a float switch as well as an independent pressure and flow controller an automated – built in loss of prime and programmed automatic re-start.

Nothing like keep digging a HOLE – BIANCO – White Int. said – lets bring out some plastic crap and call it RS4E or MK4, -…

… Why stop there, let’ s keep digging they must have thought ?… lets bring out a MK5 and now a MK6 as they try to perfect the rubbish – Gheeesh, slow learners !

Looking at the Rainsaver MK5 and its mate the MK6 being a plastic composite TECHNOPOLYMER unit with ONLY 2 Years Warranty – one has to ask as to what they can’t be sold separately and ONLY can be sold as per Watermark License Conditions as a PUMP and VALVE assembly – WHY ?

This not only snags a Pump Dealer & their clients to purchase the Package yet it also grants a COST that could be construed as onerous at best – unreasonable and dare Mark say a RIP-OFF.

If that’s not bad enough – the Rainsaver Mk5 and Mk6 et al PLASTIC Valves ONLY come with a 2 YEAR Warranty ! – WHY ?

The 1” ACQUASAVER® comes with a 5 year Parts Warranty and a LIFE TIME WARRANTY on the SOLID BRASS BODY –  it’s NOT PLASTIC as is the Bianco Rainsaver DN20 – Rainsaver Mk5 and Rainsaver Mk6!

Regarding thousands of warranty calls and complaints of failed and ceased RAINSAVER Mains Water switching units, – YES, some are / were very poor installation matters but most are NOT.

The Bianco RainSaver MK 1 was replaced by an “ upgraded Bianco RainSaver Mk 11” to only be put to one side as a Hydraulically controlled unit and replaced with the Bianco Rainsaver MK3e version being an electronic controlled version reliant on a 240 V power source and an internal solenoid to drive the switching valve – this was a step in the WRONG direction in our opinion – not to mention we now also had to add a 12 Volt Float into the Tank to help the unit understand what it is / was to do in theory.

That 3rd generation unit being the Bianco Rainsaver MK3e came out with much fanfare also – but again to the drama and angst of Water Pump Dealers and consumers across Australia and New Zealand when the units began to overheat, the body would warp and or overheat the main sealant “O Ring“ causing it to unseat and drip water constantly and it still goes on today all over Australia.

These days the architect of that mess has retired while the sh1t still today hits the fan !

Anyway, Mark continues his 100% focus on recovery and helping, by now Importing QUALITY PUMPS ONLY & Distributing QUALITY PRODUCTS – 2nd to NONE !

For what it’s worth to back up Mark’s claims & deep concerns – Mark has an e-mail sent to INTERNAL KEY MANAGEMENT at WHITE INTERNATIONAL – declaring & advising Staff on the Warranty Customer Care Front-Line “ to SAY and ADMIT to NOTHING “ – that email, let’s say, was also sent accidentally outside the internal Head Office distribution list ! – Mark has a copy in his custody as more evidence.

The line in the sand came when Mark lost a valued customer spending in excess of $250K a Year over arguments regarding quality and constant warranty complaints with the Bianco Rainsaver !

At about that point of time Marks sense of humour was beginning to fail BADLY –  in fact, in his honest opinion yet again – if the Rainsaver units were all melted down they wouldn’t even make good plastic speed bump or decent crab pots.  Might you feel this is harsh just call around before you hand over your well-earned dollars !

In closing this section all we say is Buyer Beware and trust you will benefit from our bad experiences.

                                                               _________________________________________

The Davey Rainbank Kit – KRB1, KRB2, KRB3, KRB4, KRBS1, KRBS2… and so on ! 

   

The following again is Marks Opinion ( Fact & Founded )  and that of many – many Plumbers, Builders and Home owners across the Nation – don’t just take his word for it just call around and ask.

The 2nd Generation RainBank® automatic rainwater harvesting controller allows the priority sourcing of rainwater for toilets and laundry, only using mains water as a backup. RainBank Kit KRB1 is ideal for average size homes.

KRB1 comes with the two stage HP45-05 pump. KRB2 comes with the four stage HS 50-06 pump. KRB3 comes with the four stage HM 60-08 pump. KRBS1 comes with a two stage submersible D42A/B pump that goes inside your rainwater tank to reduce operation noise.

The KRBS2 comes with a three stage submersible D53 A/B pump that goes inside your rainwater tank to reduce operation noise…yet the real noise comes when arguing for service and warranty help due to the product constantly failing and out of order.

While not as bad as the Rainsaver Units by White International & their Bianco, BIANCO PUMPZ, BIANCO Series 2 et al. –  they still have created much angst in the industry.

That said, you pay through your nose for one as it’s related to a DAVEY as a brand – if you wish to line fat cats pockets knock yourself out,- but please don’t say you weren’t warned.

The ONGA Water Switch Mk1 and The ONGA Water Switch MK11 – with the MK1 switching units more commonly referred to as The Water-WITCH

   

The following again is just I.O.H.O and that of many Plumbers, Builders and Home owners across the Nation – don’t just take our word for it – call around and ask.

I.M.H.O the ONGA Water Switch by ONGA ( a Division of U.S Giant Pentair ) has come a long way since the first generation Water Switch so very often referred to as the WaterWITCH !  The 2nd generation Onga Water Switch is really nothing more than a low cost Calessie Valve System with “ a Nice Pretty – Styled Plastic Aqua Housing “ and a digital gauge worth nothing so they can charge like wounded bulls offering a perception there is so much more for your money.

DO NOT be fooled by the design and marketing hype – all you will be doing again is tearing up your hard earned cash for nothing more that we can offer you with the MaxiSAVE™, WILO Water Widget. or AcquaSaver solid brass unit.

I.M.H.O an over-priced Pig is an over-priced Pig no matter how much “plastic” lipstick you cover it with !

Again I.M.H.O, all you are doing is paying for a Brand, a Boardroom, a Global Public Company and its Management.

                    ______________________________________

In OUR HONEST OPINION,  we here at AQUATICA Water Pumps sure understand where ours & hopefully your money is best spent!

We here at AQUATICA Water Pumps sure understand where ours & hopefully your money is best spent, or as Mark says – rather than feeding Brand named
Fat Cats & pending drama all associated !

Should you still want a Mains Water Switch, other than the ACQUASAVER BAS25 or BAS20 – we sadly can’t help nor serve you, and wouldn’t sell
them to you out of sheer respect.

Mark thanks you for reading and he trusts the above has been of some help, explanation and solid advice.

At AQUATICA Water Pumps, we look forward to serving you with QUALITY PUMPS, and most importantly, the BEST Rain Water to Mains Water Supply Switching Valves that your money, and that of your clients, can buy – again 2nd to NONE !

In closing- for those who wish not to read, can’t read for whatever reason – Mark respectfully sums up & submits the following picture – as they say a PICTURE is worth 1,000 WORDS !  – BUYER BEWARE

When a Picture is worth 1,000 Words !