Cast Iron Industrial Strength – 1800 Watt Stainless Steel Main Body SEWAGE CUTTER WATER PUMPadmin2018-06-27T08:02:49+10:00
AQUATICA 1800 Watt Sewage Cutter Submersible Pump with Cast Iron Industrial strength Pump Housing, and partial Stainless Steel Body with External Float AUTO Controller – that can be left suspended & flipped to carry handle.
This Pump is in the process of being Ordered and Shipped to our Warehouse. Pre-Orders are being taken now.
To enquire or to secure your Pump Order/s please call:
Technical Information & Performance Parameters:-
Pump Model # :
AQ-SEWCIS1800 SEWAGE Submersible Pump
Power Rating OUTPUT:
1800 Watt - 1.8kW
Best Use Application:
Grinding, Cutting & Transfer of Raw Sewage, Sump Draining, and movement of Black Water.
External Float control:
Controlled ON and OFF via External Float Switch attached to Pump
Max. Delivery Rate:
27000 L/Hour – 27m³/Hour
Max. Litres Flow:
450 Litres per Minute
Max. Delivery Head:
10 Meters Head
Max. Submersible Depth:
Outlet G2" - 2 inch - 50 mm, Side Discharge Port
Fixed Cutter Blade:
9Cr18 - High Carbon Chromium Stainless Steel similar to AISI440C Stainless Steel - Best material for long term sharp cutting edge
High Speed Knife Cutter:
High Speed Spinning Knife Cutter Blade is made using the 9Cr18 Stainless Steel
Main Pump Body and Impeller:
Upper Cover, Pump Body and Impeller made using Cast Iron HT200. Central Motor Case made using Stainless Steel AISI304.
Motor - Drive Shaft Material:
Main Shaft made of 2Cr13-Martensitic Stainless Steel 420
Drive Shaft Bearings:
GERMAN Designed & Made – FAG Roller Bearings
ITALIAN Designed & Made MECHANICAL Seal by MTU Group - Carbon Ceramic NBR
Pump Dimensions ( Approx ):
520mm High x 255 mm Wide
Pump in Box Packed:
690 mm High x 350 mm Wide
Power Cable :
10 meters long- H07RNF Neoprene Chemical and Oil Resistant Cable
220V-240 V /50Hz
Current - Amperage:
Amperage Draw -
This Range of Pumps is also available in other Power-Performance Options being: 1100 Watt and 1300 Watt
Features & Benefits for this #1 – TOP SHELF SUBMERSIBLE SEWAGE CUTTER PUMP
Massive Industry Best –3 Year Warranty without paying a huge price – all due to UPGRADED INTERNALS !
External Float Controller incorporated into Pump to assist with Auto On-Off Control
Made using the best MECHANICAL SEAL money can buy:- UPGRADED to MTU – Worlds #1 Mechanical Seal Designed and Made by Italian Owned Company Meccanotecnica Umbra S.p.A. – The MTU Group.
Made using the best BEARINGS money can buy:- UPGRADED to FAG – #1 German Made Roller Bearings.
Cast Iron Pump Body giving great strength and absolute reliability & longevity, coupled with Stainless Steel Motor Housing.
Main Shaft made of 2Cr13 - Martensitic Stainless Steel 420
High Speed Knife Cutter Blade is made using the 9Cr18 Stainless Steel
1st Grade Motor using solid COPPER WINDINGS ( some cheap pumps use Aluminium )
Stator & Rotor made using Precision Punched Silicon Steel Sheet
240 Volt – 50 Hz Induction Motor with Overload and Run Dry Cut-Out
This Pump is built with a Thermal Protector
This range of Submersible Sewage Cutter Pumps under special order can be made for THREE PHASE, 380V - 415V
Operating Conditions for these Pumps is best upto a liquid temperature +35 degrees celsius
The maximum ambient operating temperature is upto +40 degrees celsius.
Built–In Carrying Handle on Pump for assisting lifting of pump in and out of sewage vessel / tank.
This carry handle can also have a Stainless Steel cable tethered to the Pump to ease retrieval or lowering Pump into position
Suggested Applications for this 1800 Watt Pump, best used for & NOT limited to :-
An ideal pump for Emulsification and transfer of sewage and other putrid liquids from one point to another.
While robust the Pump weighing 32kg is easily lifted or transported by hand in and out of it’s working environment/tank.
This Pump can be used with other Liquids similar to water with similar physical viscosity and must have ZERO / NON-Corrosive properties.
Can also be used for the movement of suspended solids and light slurries.